BBV TECH SUPPORT SERVER SOFTWARE AND UTILS

Software and Utilities

This folder contains many of the utilities and software that can be used to enhance your BBV product.
If the specific utility or version of software that you require is not shown please contact the webmaster

Upgrade Software You can download the current version of software for all BBV Products from here.

    Legacy Software You can download the old version of software for BBV Products from here

    TX1000 Virtual Keyboard This is PC based keyboard for the Tx1000.
    **Faster download from FTP Server**

BBV422 PC Keyboard This is PC based keyboard for BBV422 and other Protocols. (BETA ONLY)

Tx1500 Up Down GUI V1.3 This is used for saving Tx1500 configurations and with this application you can name cameras.
This is for versions before TX1500 v4.2

   Tx1500 Up Down GUI V1.4 This is used for saving Tx1500 configurations and with this application you can name cameras.
    This is for the version TX1500 v4.2 and after.

    Tx1500 Up Down GUI .PDF Connection drawing for the above application.

Tamper safe GUI This is the GUI used for Configuration of the Tamper Safe Systems.

FBM Test GUI This is a test GUI for the FBM it does not work with BBV Keypads

    Flash Simple   This is the programming utility used to Program:
                                                                                            Tx1000MK2 Matrix
                                                                                            Tx1500 Matrix (not COAX chip)
                                                                                            Tx1500 BBUS Interface
                                                                                            CTI16 (not COAX chip)
                                                                                            Touch Screen Keyboard
                                                                                            Starcard Converter
                                                                                            1-2-1 Converter
                                                                                            Privacy Board

                                                                                            Rx45X/55X
                                                                                            Rx450/550 (Panasonic)

                New Version of Flash Simple                            for above boards with the new H8.3064. Chip
        RENESAS Flash Development Toolkit
**Faster download from FTP Server**

There are some basic instructions for programming different products. if you can not see the one you need please email support@bbvcctv.com .

    Rx55X being programmed from a RS232Kit (H8 3062)
    Rx550 Rx55X bottom board being programmed from an Rx450 programming adapter (H8 3062)
    Tx TPO MK2 being programmed from a RS232 Kit (H8 3062)
    Starcard Converter being programmed from an Rx450 programming adapter (H8 3062)
    Tx1000 being programmed from RS232 (H8 3062)
    Tx1500 being programmed from a RS232 Kit (H8 3062)
    A Privacy board being programmed from a RS232 Kit (H8 3062)
    Circuit Diagram of RX450 Programming adapter

Application Note How to install and use RENESAS Flash Development Toolkit

    Upgrading the firmware of the RX45X & RX55X MK5 (H8/3064F)
    Upgrading the firmware of the RX45X & RX55X MK4 (H8/3064F)
    Upgrading the firmware of the RX45X & RX55X MK4 Bottom Board (H8/3064F)
    Upgrading the firmware of the TX1000 MK2 (H8/3064F) V2
    Upgrading the firmware of the TX1500 (H8/3064F) V3
    Upgrading the firmware of the 1 2 1 Converter (H8 3064F) V3
    Upgrading the firmware of the BBUS Interface (H8 3064F) V3
    Upgrading the firmware of the Starcard Converter (H8 3064F) V2
    Upgrading the firmware of the CTI 8 & 16 (H8 3064F) V2

The RX45X & RX55X firmware update from a Micro SD card (2GB Cards only)

SD Card Upload for RX45X & RX55X MK5 Instruction Manual V3

Latest RX45x & RX55X firmware

The RX45X & RX55X tour support this requires a Micro SD card (2GB Cards only)

Recording a Tour and preparing a microSD card for RX45X & RX55X MK5 Manual

Configuration data using a microSD card

MPLAB This is the programming utility used to Program:

                                                               RX100
                                                               TX1000
                                                               TX1500
                                                               TX300/400/400DCRS485 Keyboards

    Programming a BBV RX100 with Microchip MPLAB and ICD2 programmer
    Programming a TX1000/KBD with Microchip MPLAB and ICD2 programmer
    Programming a TX1500/KBD with Microchip MPLAB and ICD2 programmer
    Programming a TX300, 400, 400DC & 400DC/RS485 KBD with Microchip MPLAB and ICD2 programmer

PICkit 2Programing tool

DOWNLOAD

    Logging Utilities These only work on:       COM1

    When you have down loaded any of the Logger files and started the
    application you will need to press the "S" key to open configuration screen
    for the COM port. When the correct setting are selected press the "S" key
    to close configuration screen.

    BBV COAX & TP Frame Logger
    BBUS Logger
    BBV422 Logger
    Dennard VB Logger
    Logger
    Molynx Logger
    Pelco D Logger
    Pelco P Logger
    Philips Logger
    Sensormatic RS422 Logger
    Telix
    Tx1000 Logger
    VCL Logger

    DS2 Viewer

Video Central Lite 11.01.00.

Docklight This is a windows based logging program.
Docklight **Faster download from FTP Server **